GB/T 19951
ChinaAutoRegs|GB/T 19951-2019英文版/English/翻译/道路车辆 电气/电子部件对静电放电抗扰性的试验方法
Road Vehicles — Disturbances Test Methods for Electrical/Electronic Component from Electrostatic Discharge
GB/T 19951-2019英文版/English/翻译
1 SCOPE
This Standard specifies the test methods for determining the immunity of vehicle electrical/ electronic components (ESA) to the electrostatic discharge (ESD) which is liable to occur during the assembly/maintenance process and caused by driver and passenger inside and outside, including the tests for components and complete vehicles.
This Standard is applicable to the electrical/electronic components for Categories M, N, O and L vehicles, regardless of the vehicle propulsion system, e.g. spark-ignition engine, diesel engine and electric motor.
2 NORMATIVE REFERENCES
The following referenced documents are indispensable for the application of this document. For dated references, only the editions cited apply. For undated references, the latest editions of the normative document (including any amendments) apply.
GB/T 29259-2012 Road vehicle - Electromagnetic compatibility terminology
3 TERMS AND DEFINITIONS
For the purpose of this document, the terms and definitions established in GB/T 29259-2012 and the followings apply.
3. 1
被测设备device under test; DUT
接受试验的电气电子单个组件或组合件。
3.2
空气放电air discharge
将试验发生器的充电电极靠近DUT、由作用在DUT 上的电弧进行放电的一种试验方法。
3.3
接触放电contact discharge
试验发生器的电极保持与DUT 接触、通过触发发生器内的放电开关对DUT进行放电的一种试验方法。
3.4
直接放电direct discharge
直接对DUT 实施放电的试验方法。
3.5
间接放电indirect discharge
对DUT 附近的榈合板实施放电的试验方法。一般用来模拟人体对DUT附近的物体进行放电。
3.6
表面surface
DUT 无缝外壳、缝隙或开口。例如. 翘板开关、触点、通风孔、扬声器出声口。
3.7
保持时闽holding time
放电前因泄漏而引起试验电压下降10%所持续的时间。